Yamaha ’09 YZF-R1 Kit Manual page 41

8. Remove the washer, special nut and spring guide and replace the spring.
NOTICE
Be very careful to apply downward pressure on the rod (
remove the spanner (
9. Press the rod downwards before adjusting the oil level.
• Oil level in Shipping state: With the spring removed and the outer tube and rod lowered,
10. Reassemble the parts after oil level adjustment by following the disassembly procedure in
reverse.
).
SPECIAL TOOLS
Washer
Special nut
Spring guide
160mm from the top of the outer tube.
Tightening torque: 20N/m
– 38 –
) when you
SPECIAL TOOLS