3-1-5. Description on Setup Menu
Some of adjustments given in this section use the setup
menu. The setup menu consists of the following menus.
Besides there is a TOP menu indicating the entire configu-
ration of menu items.
. USER menu
. USER MENU CUSTOMIZE menu
. OPERATION menu
. PAINT menu
. MAINTENANCE menu
. FILE menu
. DIAGNOSIS menu
. SERVICE menu
In this section, describes the setup menu operation as
follows.
For example:
When AUTO LEVEL in AUTO SETUP page of MAIN-
TENACE menu is performed:
MENU:
MAINTENANCE
PAGE:
AUTO SETUP
ITEM:
AUTO LEVEL
How to display the SERVICE menu
HDC1000
Set the DISPLAY switch to "MENU" while pressing the
ASSIGNABLE switch and the MENU SELECT switch
(ENTER side).
HDC1400/1500/1550/1580
Set the DISPLAY switch to "MENU" while pressing the
ASSIGNABLE switch and the rotary encoder.
3-4
How to change the setting values
To enter or cancel the setting value of items, which can be
changed by turning the MENU SELECT control
(HDC1000) or rotary encoder (HDC1500/1550/1580),
proceed as follows.
HDC1000
To enter the setting value:
Press the MENU SELECT switch toward the "EN-
TER" side.
To cancel the setting value:
Before pressing the MENU SELECT switch toward
the "ENTER" side, press the MENU SELECT switch
toward the "CANCEL" side. The original setting is
restored.
After the MENU SELECT switch is pressed toward
the "ENTER" side, the setting cannot be canceled.
HDC1400/1500/1550/1580
To enter the setting value:
Press the rotary encoder.
To cancel the setting value:
Before pressing the rotary encoder, press the MENU
switch toward the "CANCEL" side. The original
setting is restored.
After the rotary encoder is pressed, the setting cannot
be canceled.
HDC1000/V1(E)