Settable Special Functions - Sony HDC1000 Maintenance Manual

5-2. Settable Special Functions

The following functions are made available by settings in
the service menu. Note that they are limited functions. In
addition, settings of the number of scene files, aspect ratio
of the down-converter, and filter local return position are
available. Refer to the description in the service menu.
When an autofocus lens is used
When an auto focus lens of Fujinon or Canon is used, a
focal area marker and a focusing indicator can be displayed
on the viewfinder.
When AF DISPLAY in "Setup" in the service menu is set
to ON, the area marker appears according to the area
marker display switch of the lens.
The area marker is a rectangular frame in which auto focus
is detected.
"AF" is added to "VF DISPLAY" in the Operation menu.
When this "AF" is set to ON, the indicator appears.
Focusing indicator
Front focus
Focal point
Rear focus
However, there are the following restrictions.
. If "AF DISPLAY" is set to ON, no effect area can be
displayed.
. If "Digital extender" is set to ON, the area marker is not
displayed correctly.
5-2
Descriptions of Service Menu
SETUP
<SET UP> S01 TOP
SCENE FILE TYPE : 5
AF DISPLAY : OFF
FILTER RESUME : OFF
LENS IF MODE : AUTO
SCENE FILE TYPE
Setting of the number of scene files that a camera can
have. A number of 5 or 32 can be set. Note that, when the
number of scene files is changed from 32 to 5, the data of
the sixth and the following scene files are lost. The factory
setting of the number of scene files is 5.
AF DISPLAY
When an autofocus lens is used, a focal area marker and a
focusing indicator can be displayed on the viewfinder.
Refer to "When an autofocus lens is used."
FILTER RESUME
When the buildup connector is installed in HDC1000 or
HDC1400/1500/1550/1580 and "FILTER LOCAL" is
changed from ON to OFF on the rear panel, the camera
filter position must be set. The factory setting is OFF. For
HDC1400/1500/1550/1580, set this function to OFF.
FILTER RESUME OFF
FILTER RESUME ON
LENS INTERFACE MODE
When a lens that is able to communicate with a camera
through the serial interface, the interface mode can be
changed forcibly to the parallel interface. The factory
setting is AUTO.
AUTO Sets an interface automatically.
PARA Selects the parallel interface forcibly.
The filter position is
maintained.
The filter position returns
to the value immediately
before FILTER LOCAL is
set to ON.
HDC1000/V1(E)