2-13. Replacing the Boards (HDC1400/
1500/1550/1580)
2-13-1. CN-2617 Board
1. Remove the inside panel and outside panel.
(Refer to Section 1-4.)
2. Remove the DC fan (front). (Refer to Section 2-5-1.)
3. Remove the four screws, and lift the sub frame
assembly.
4. Disconnect the harnesses from the connectors (CN2,
CN3, CN7, CN8, and CN9) on the CN-2617 board,
and remove the sub frame assembly.
CN2
CN8
CN9
CN7
Sub frame assembly
B2.6 x 5
2-28
CN-2617 board
CN3
B2.6 x 5
5. Disconnect the harnesses from the connectors (CN4,
CN5) on the CN-2617 board.
6. Remove the two screws, and remove the CN-2617
board.
CN5
B2 x 4
7. Install the CN-2617 board by reversing the steps
above.
CN-2617 board
CN4
HDC1000/V1(E)