Samsung SRP-275 Operator's Manual page 93

CHAPTER 5
CONTROL COMMANDS LIST
ESC N n
[Name] Set bottom margin to n lines
[Format] ASCII ESC
Hex 1B
Decimal 27
0 ≤ n ≤ 255
[Range]
[Default] n = 0
[Description] This command sets the bottom margin position to
(current line feed amount x n).
The current position when setting is effective from the next page when within the
bottom margin. The bottom margin set using this command is unaffected by
changing the form feed amount.
The set bottom margin is cleared using the ESC N NUL or the ESC O command.
The bottom margin must be a value smaller than that for the length of one page.
If it is higher than the length of one page, the setting is ignored.
Bottom margin of n line Portion of automatic paper feed.
5-94
N n
4E n
78 n
ESC O
[Name] Cancel bottom margin
[Format] ASCII ESC O
Hex 1B 4F
Decimal 27 79
[Range] ------
[Default] (Not set)
[Description] This command clears the bottom margin set using the ESC N
(set bottom margin to n lines).
5-95