Samsung SRP-275 Operator's Manual page 105

CHAPTER 5
CONTROL COMMANDS LIST
ESC RS E n
[Name] Clear the ETB counter and ETB status 30 69 n
[Format] ASCII ESC
Hex 1B
Decimal 27
[Range] n = 0
n = 48 ("0")
[Default] ------
[Description] Clears the ASB ETB counter to zero and clears the auto status 1 — 1 ETB
status.
CAN
[Name] print data and initialize commands
[Format] ASCII CAN
Hex 18
Decimal 24
[Range] ------
[Default] ------
[Description] When the reception buffer and line buffer are cleared, the set commands are
initialized. Immediately executed not when taking out from the reception buffer,
but when received from the host.
DIP Switch is not reread.
The following shows the specifications that are not initialized by this command.
- DC1 and DC3 select/deselect status
- ESC BEL external device drive conditions
- Auto status valid/invalid conditions
5-118
RS E n
1E 45 n
30 69 n
DC3
[Name] Printer deselect
[Format] ASCII DC3
Hex 13
Decimal 19
[Range] ------
[Default] Select printer
[Description] Deselects printer. All received data is discarded until the next DC1
(printer select) is received.
DC1
[Name] Select printer
[Format] ASCII DC1
Hex 11
Decimal 17
[Range] ------
[Default] Select printer
[Description] Cancels the deselect state of the DC3 (printer deselect) and selects the printer.
5-119