Canon iPF9000S Troubleshooting Manual page 19

Panel display
Code
(last 4
Large LCD
digits)
1049 Before borderless
printing, move the
blue platen switch.
1050 Blue platen switch
is dirty. Please
clean the switch.
1051 Paper Too Small
1052 Borderless printng
not possible. Check
supported paper.
1053 Paper position not
suitable for
borderless printing.
1053 Borderless printng
not possible. Check
pap. pos. or spacer
1054 PaprWidth Mismatch
Small Small
LCD 1 LCD 2
When print data with borderless printing
specification has been received, platen
shutter was closed.
Cleaning of platen shutter is necessary.
When reading the platen shutter in
multisensor, borderless printing data has
been received in unstable output condition.
Paper mismatch (size)
Size clip warning
With [Warning Indication] selected for [Paper
Mismatch Detection] in the menu settings,
the size of paper loaded is smaller than that
of specified from driver.
Borderless printing not available
(unsupported size)
With [Warning Indication] selected for [Paper
Mismatch Detection] in the menu settings,
borderless printing data is received, but roll
paper not supporting borderless printing has
been loaded.
Borderless printing not available (physical)
With [Warning Indication] selected for [Paper
Mismatch Detection] in the menu settings,
borderless printing data is received, but roll
paper loaded is more than 1mm off the
predefined position for the pre-ejection
opening at the counter-HP side.
Paper mismatch (size)
With [Warning Indication] selected for [Paper
Mismatch Detection] in the menu settings,
the width of roll paper loaded and that of
specified by data do not match.
2-7
Explanation/Detection sequence
Chapter 2 Indexes by Case
Remedial Action
(★: Reference fault
isolation procedure
or tool)
Open the platen
shutter.
Clean the platen
shutter.
Continued printing
allowed.
Check driver
settings.
Replace with
appropriate paper.
Replace with
appropriate paper.
Reload/ replace
the roll paper.
Go to ★2010
(P3-12)(iPF8300
series).
Reload/ replace
the roll paper.
Check the
borderless spacer.
Go to ★2010
(P3-12)(iPF6300
series)
Continued printing
allowed.
Check driver
settings.
Replace with
appropriate paper.