Speaker Setup; [Speaker Select] - Kenwood DDX630BT Instruction Manual

Setup Menu
[On Screen Navigation] Sets an on-screen
display of the navigation screen. (
"Auto": Information is displayed for 5 seconds
when updated.
"OFF": Information is not displayed.
⁄
• [On Screen Navigation]
It can be set only when [Navigation Input] is set to "AV-
IN".
68 DDX630BT

Speaker Setup

"OFF")
You can select a speaker type and its size to get
the best sound effects.
1 Display the Speaker Select screen
Touch [
[Speaker Select]. (page 55)
2 Select a speaker you wish to adjust
When the speaker type and size are set, the
speaker crossover network and equalizer curve
are set automatically.
1
2
Front speaker
1
Rear speaker
2
Subwoofer
3
[Subwoofer] Sets the availability of
subwoofers.
[X'over] Displays the Speaker Crossover Setup
screen.
You can adjust the crossover setup that was
set automatically when you selected the
speaker type.
3 Select a speaker type
You can select front speaker type.
"Standard"/ "Wide"/ "Middle"/ "Narrow"
⁄
• Speaker cannot be setup when in STANDBY source
mode.
> >
] [ ] [Audio SETUP]
3
>