Setup Menu; Display Information - Kenwood LZ-702IR Instruction Manual

Operations
Setting the AV Output
Selects an AV source to be output at the "AV
OUTPUT" terminals.
Press the [MENU] button for at least 1 second.
Each time the button is pressed for at least 1
second, the AV output switches as follows:
Display Setting
"AV-IN1" Select the AV1 INPUT source.
"AV-IN2" Select the AV2 INPUT source.
"Off" No output to the AV OUTPUT terminals.

Display information

When you press the [V.SEL] button, the status of
the monitor is displayed.
1
Mode
Full
2
I R
Off
1 Screen mode Display
2 IR Headphones audio setting Display
3 Video source Display
4 AV output Display
• The information display is cleared automatically after
approximately 5 seconds.
6
|
English
AV-IN2
3
4
A V
AV-IN1
Autogood products Internet store "130"

Setup Menu

Menu System
The Menu system operation method is explained
here. The reference for the Menu items and their
setting content is after this operation explanation.
1
Enter Menu mode
Press the [MENU] button.
Menu screen is displayed, and the monitor enters
to Menu mode.
Current menu item
AV-OUT
IR HEADPHONE
Surround
Frequency
2
Select the menu item
Press the [MENU] button.
Each time the button is pressed, the menu item
switches.
3
Set the menu item
Press the [2] or [3] button.
You can continue by returning to step 2 and
setting other items.
4
Exit Menu mode
Press the [MODE] button.
• You can select "Surround" and "Frequency" when <IR
HEADPHONE> is not set to "Off".
• If you make no operation for 15 seconds, this mode
is automatically canceled.
AV-IN1
Normal
On
2MHz