Dvd Setup; [Dvd Setup] - Kenwood DDX630BT Instruction Manual

Crossover Network Setup
You can set a crossover frequency of speakers.
1 Select the speaker to set the crossover
1 1 1
2 2 2
3 3 3
1 Sets the High Pass Filter of the front speaker.
2 Sets the High Pass Filter of the rear speaker.
3 Sets the Low Pass Filter of the subwoofer.
2 Display the Crossover setup screen
3 Set the crossover
[Phase] Sets the phase of subwoofer output.
The phase is reversed 180 degrees when set
to "Reverse".
Sets the subwoofer phase. (Only when
"Subwoofer" is set to "ON" in Speaker Setup,
and [LPF FREQ] is set to other than "Through")
[HPF FREQ] High Pass Filter adjustment.
(When front or rear speaker is selected on
Speaker Select screen)
[LPF FREQ] Low Pass Filter adjustment. (Only
when "Subwoofer" is set to "ON" in Speaker
Setup)

DVD Setup

You can set up the DVD play.
1 Display the DVD Setup screen
Touch [ ] > [
2 Set each item
[Menu Language]* Selects a disc menu
language.
(See <DVD Language Setup>, page 70)
[Subtitle Language]* Selects a subtitle
language.
(See <DVD Language Setup>, page 70)
[Audio Language]* Selects an audio
language.
(See <DVD Language Setup>, page 70)
[Dynamic Range Control]* Sets the dynamic
range. ( "Dialog")
The dynamic range is reduced by changing
from "Wide" to "Normal" and from "Normal"
to "Dialog". "Dialog" makes the total sound
volume becomes larger as compared with
"Wide" and "Normal", allowing you to listen to
the movie's dialog more clearly.
This is effective only when you are using a
Dolby Digital software.
The operation is available during the play stop
mode.
[Angle Mark] Sets an angle mark display.
( "ON")
] > [DVD SETUP]. (page 55)
Next page 3
English 69