Controlling Audio; Way Speaker System Setup - Kenwood DDX9018S Instruction Manual

Controlling Audio

You can adjust various settings such as audio
balance or subwoofer level.
1
Press the [MENU] button.
h Popup menu appears.
h
2
Touch [Audio].
See the following section for each
setting.
• Set up speaker/ X'over (P.64)
• Controlling equalizer (P.66)
• Set listening position/ DTA (P.69)
• Controlling general audio (Fader /
Balance) (P.66)
• Set volume offset (P.67)
• Performing zone control (P.68)
• Set sound effect (P.69)
• Memory/recall the audio settings
(P.71)

3 way speaker system setup

Select the appropriate crossover network
mode according to the speaker system (2-way
speaker system or 3-way speaker system).
1
Press the [HOME] button.
h HOME screen appears. h
2
Touch [
].
h Source selection screen appears.
h
3
Touch [STANDBY].
4
Press the [G] (1) button and the [S] (2)
button for 1 second at the same time.
2
h Speaker system select screen appears. h
5
Select the crossover network mode.
h A confirmation screen appears. h
6
Touch [Yes].
NOTE
• When the 3-way speaker system is selected, the
following functions are disabled.
– Zone Control
– Fader of Controlling General Audio
– Front focus of Listening Position/ DTA
– Select the speakers to output the sound from
cell-phone of Blutooth HF/Audio
– Beep of User Interface Setup
• Connecting 3-way speakers with the 2-way mode
selected can break the speakers.
Controlling Audio
2
1
1
63
English