Continuous Drainage - Mitsubishi Electric MJ-E15BX-A1 Instruction Manual

Continuous Drainage

If a drain is available, the unit can continuously drain excess water by attaching a commercially available hose
(internal diameter 15mm).
The unit can be operated for extensive periods without the need to empty the water tank.
Commercially available hose
Items to
(I.D. 15mm)
prepare
Long enough to reach the drain.
How to set up the drainage hose
Correctly Incorrectly
installed installed
1
Remove the water tank.
Remove the continuous
2
drainage lid
Confi rm that the hose does not show signs of deterioration such as bending, cracks and clogging.
Inspect the hose every 2 weeks. Insects or dirt blocking the hose may cause leakage resulting in malfunctions.
Keep the continuous drainage lid in a safe place so as not to lose it.
hose immersed in
water
hose raised to a
level higher than the
drainage outlet
→
The water will not
drain.
Continuous
drainage lid
When the lid is diffi cult
to remove, pull it while
twisting
Position of drainage outlet
CAUTION
Do not drain water continuously if there
is a possibility that temperatures around
the hose could drop below freezing point.
Water inside the hose may freeze and water may leak
from the unit and damage surrounding objects.
Keep the continuous drainage lid out
reach of children.
Failing to do so may result in the lid being
accidentally swallowed.
When draining water continuously or left
unattended for long periods, inspect the
unit once a fortnight.
Foreign objects, etc. could clog the hose resulting in
overheating and/or leakage.
3
Attach a hose to the unit
With the stopper pushed up, insert a
commercially available hose (diameter of 15 mm)
all the way to the base of the drainage outlet,
and confi rm that no water leaks out.
Hose
Drain
Attach the tank to the unit,
4
and place the end of the hose
in the drain location.
The unit cannot operate without the tank installed.
Stopper
To drain
location
21