Draining - Mitsubishi Electric MJ-E15BX-A1 Instruction Manual

Draining

The unit automatically shuts down and the Tank Full lamp is lit when the tank is full.
Empty the tank.
When the tank becomes full, the FULL lamp lights.
Tank Full lamp lights.
(The unit beeps continuously).
The CURRENT HUMIDITY indicator goes out.
Airfl ows stop after air is blown for approximately 2 minutes.
1
Remove the water tank.
Hold the tank this way
Slide the tank lid to open the
2
tank and then empty the water.
Tank lid
20
Grasp handle
and slide out.
Pour the
water out as
shown.
After removing the water and replacing the
tank, the Tank Full lamp will go off, and the unit
will automatically return to operation mode.
When the Tank Full lamp is lit, no operation but
ON/OFF is possible.
When using the OFF timer, you are only
notifi ed by the FULL lamp lighting.
Slide the tank lid to close the
3
tank.
Insert the tank all the way in
4
while supporting the unit.
Tank guard
Make sure the tank is
inserted correctly
A beep sound is heard.
Secure the lid and guard properly or else the
tank may become stuck.
If the tank is not installed correctly, the tank full
light will come on, and the unit will not operate.
Do not remove or dismantle the fl oating element
in the tank. If it is removed, the unit cannot detect
when the tank is full, and this could result in
leakage.
Tank
Make sure the tank is
not broken or cracked