Operation - Hitachi BD-W3300 Instruction Manual

In case of when abnormal situations happen
Symptoms
The time left indicator
blinks without
reduction of the time
Time left indicator
blink after spinning

operation

The time left indicator
shows the indication
more than that set for
the spinning
Time left displayed
immediately after the
starting of operation
is more than the
previous time.
94
Please check the following items
The operation may continue for 1-2 hrs. after the indicator
shows the remaining time of 10 MIN. Drying time is
automatically added when drying of the washing load is
insufficient.
Have you selected [UNTANGLING SPINNING]?
This is displayed when the washing load is subject to
unwinding action after spinning.
Are your running the Soft program?
This indicates that warm air is blown on the washing load
during spinning operation.
The time left includes the unwinding action to ensure balancing
in spinning, accelerating of the tumbling drum and spinning with
unwinding action.
If the tap water pressure was low (water feeding time was
longer) during the previous operation, water feeding time is
corrected and the time displayed is longer than the previous
time.
Has the dirt accumulated in the filter of the water supply inlet?
Adjustment method
It is not an error.
Pressing Pause button will turn off the power supply. Washing
load can be removed after that. For setting and canceling
[UNTANGLING SPINNING].
It is not an error.
It is not an error.
It is not an error.
Clean the water supply inlet. (P.77)
(Continued)