In Case Of When Abnormal Situations Happen; Operation - Hitachi BD-W3300 Instruction Manual

Symptoms
Is the laundry inclined to one side causing imbalance?
Additional rinsing may be performed to correct the imbalance
of the laundry. (Although the time left indicator changes,
display of the rinsing rotations do not change)
Rinsing operation
Have you put in too much detergent?
differs from the
program set
When too much foam is generated during rinsing and spinning
operation, operation mode changes to [WATER INJECTION
RINSE] to suppress foam generation.
If the imbalance of laundry does not correct during spinning,
operation mode automatically changes to [WATER INJECTION
RINSE].
No water is injected
although the indicator
When the last rinse cycle is water-injection rinse, water is not
shows [WATER
injected as softener is infused during water-injection rinse.
INJECTION]
Machine returns to
Did the laundry get imbalanced during final spinning stage?
rinse operation during
spinning operation Machine returns to rinse operation to correct the imbalance of
laundry.
Rotation speed of the
Depending on the quantity or imbalance of the laundry, rotation
drum changes during
speed of the drum is automatically adjusted.
spinning operation
Is the [SOFT] program in operation?
starts blinking during
HIGH
spinning operation
Since the heater is used during spinning operation,
blinking.
Has the [UNWINDING SPINNING] setting been cancelled?
When the operation is started from rinsing or spinning
operation, unwinding action is not performed after finishing
the spinning.
There is no unwinding
action after the
spinning
Have you put in excessive quantity of laundry?
Unwinding action may not be performed when the washing
load is over 6 kg.
In case of abnormality in the operation of the machine
Please check the following items Adjustment method
For preventing the imbalance of the laundry, take necessary
precautions when putting the laundry in the drum.
Use appropriate amount of detergent according to the control
panel display. (P.26, 27)
It is not an error.
It is not an error.
It is not an error.
It is not an error.
It is not an error.
HIGH
starts
For setting and canceling [UNWINGING SPINNING]
It is not an error.
It is not an error.
(P.19, 20)
89