How To Prevent Wrinkle · To Avoid Uneven Drying · To Avoid The Laundry Shrinkage - Hitachi BD-W3300 Instruction Manual

How to prevent wrinkle
Some laundry is more liable to get wrinkle after
drying. It is impossible to avoid any wrinkle on the
laundry. For any dryer compared with the previous
models , this machine may cause more wrinkle in
some case depending on the type and shape of
laundry.
Especially lengthwise clothes such as cotton
shirts may have more wrinkle in case of drying
with [AUTO] in the FUZZY program for [WASH>
DRY].
When the [AUTO] operation in the [FUZZY]
program for [WASH>DRY] finishes.
After the spinning finishes, take out the laundry
and outspread the wrinkle caused by spinning,
and then put them back for drying.
To avoid uneven drying
Set the drying conditions to [HEAVY].
Use the [HEAVY] program.
Reduce the washing load (less than 4kg).
Separate thick laundry and the thin one when drying.
Uneven drying may be generated to the thick laundry. Dry them again with the [FUZZY] program.
To avoid the laundry shrinkage
For the laundries with the dry-clean label (wool sweaters, skirts, etc.), use the [SHELF DRY] program.
It's recommended to dry the laundry in sunshine first, and
(then further dry it with the Drying Program).
FUZZY program
(timer drying [30 min.])
After washing, dry it for about 30 min.
to reduce wrinkle on sleeves and so
on due to spinning. Dry the laundry by
hanging immediately after the
operation.
FUZZY program
(washing load: less than 3.0kg)
If the load is reduced the wrinkle may be
reduced.
(P.71)
(P.52)
23