Sharp 13VT-K100 Service Manual page 41

Test points layout of Main Unit.
ADJUSTMENT OF EP STILL PIC-
TURE VERTICAL SYNC
Measuring Monitor TV
instrument
Mode EP still picture playback
Input signal Self-recording tape
Test point Monitor screen
CH '/" (TR
Control
Specification No Vertical jitter
Figure 2-2.
1. Playback the EP Self-recorded tape in the still mode.
2. Using the CH '/" (TR
3. Then press the STOP button to stop the tape.
Note:
± / — ) buttons
The data of this adjustment is memorized to the E
ROM IC.
41
± /
control or inside the front cover, make adjustment so
that the vertical jitter becomes minimum.
13VT-K100/150
13VT-CK10
— ) buttons on the remote
2
P-