Sharp 13VT-K100 Service Manual page 21

No. Jig ltem
10. Alignment Tape
Guide roller height
11.
adjustment drive
X value adjustment
12.
gear type screw driver
Reverse Guide Height
13.
Adjusting Jig
Part No. Code
VROATSV CD
VROBBZGS CB
JiGDRiVERH-4 AP
JiGDRiVER-6 BM
JiGRVGH-F18 BU
21
Configuration
These tapes are especially used for
electrical fine adjustment.
Video
525 Monoscope
NTSC Color Bar
525 Monoscope
This screwdriver is used for adjust-
ing the guide roller height.
For X value adjustment
This Jig is used for height
adjustment of the reverse guide.
13VT-K100/150
13VT-CK10
Remarks
Audio Hi-Fi Audio Track
7k — 58µm
1k — 58µm
7k — 30µm