Table of Contents
Advertisement
Adjusting the Pre-delay (PreDelay)
Adjusting the Reverb Time (RevTime)
1
Press the F3 key when the REVERB display is selected.
The F3 key lights in green.
2
Adjust the delay time by turning the jog dial.
The delay time is adjustable between 0.00 and 500 ms.
1
Mono D+Rev
I 48
[Medium Hall A] PreDelay
REVERB
The unit of the delay time can be selected from ms, cm and feet. See
"PreDelay" on the SETUP display on page 33.
To adjust the delay time finely
If you turn the jog dial while holding the F3 key, the value changes
1
/
of a normal unit in one step. This allows you to adjust the delay time
5
precisely.
1
Press the F4 key when the REVERB display is selected.
The F4 key lights in green.
2
Adjust the reverb time by turning the jog dial.
The reverb time is adjustable between 0.3 s (seconds) and 6.0 s
(seconds). The maximum adjustable value differs depending on the
current reverb program.
1
I 48
[Medium Hall A] PreDelay
REVERB
[1:C12
] [ 0.00ms] [
Delay time
[1:C12
] [ 0.00ms] [
Reverb time
O
O
RevTime
2.4s]
1
/
to
50
RevTime
1.0s]
25
Chapter 3 Operation
Hide quick links:
Advertisement
Table of Contents
