Reverb Display - Sony DRE-S777 Operating Instructions Manual

REVERB Display

Loading a reverb program from the CD ROM to the selected cache memory
24
Chapter 3 Operation
If "Please change CDROM/MS" is displayed
2
Mono D+Rev
I 48 [Medium Hall B] PreDelay
REVERB [1:C12
This message appears if the reverb program of another CD ROM was
loaded when the power of the unit was turned off last time. Together with
the message, the F2 key flashes.
If "Please change CDROM/MS" appears, proceed as follows:
1
Press the F2 key.
The CD tray opens.
2
Replace the CD ROM with that indicated on the display and insert the
Memory Stick (MS) supplied with that CD ROM.
You need not change the Memory Stick when changing to the CD
ROM supplied with this unit if the Memory Stick currently in use is
the one supplied with the DASK-S70x series software (optional).
3
Press the F2 key again.
The CD tray closes and the reverb program is loaded from the CD
ROM.
Note
The Z key does not function after the program has been started from a CD
ROM. Use the Z key when inserting a CD ROM immediately after the
power is turned on.
When loading a reverb program from the CD ROM, you can select one of
1 to 9 cache memories and load the program to that cache memory.
This function is useful when you store a reverb program to an empty cache
memory or overwrite the program with a new one.
1
Make sure that the F2, F3 and F4 keys are not lit, and turn the jog dial
to display the cache memory number to which you want to store a
reverb program.
Display example of an empty cache memory
3
Mono
[
REVERB [
2
Press the F2 key.
The F2 key flashes in green.
3
Turn the jog dial until the reverb program you want to load is
displayed.
4
Press the F2 key again.
The reverb program is loaded from the CD ROM.
Name of the CD ROM to be changed
O
D A S K - S 7 0 1
RevTime
] [ 0.00ms] [ 0.0s]
] PreDelay RevTime
] [ ] [
O
]