NEC Express5800/R320a-E4 User Manual page 93

IMPORTANT:
The time required for synchronization varies depending on the partition size on the disk.
For a 40 GB partition, it takes about 50 minutes. When no partition exists on the disk,
synchronization is completed immediately after the RDR is set, and Op State: State
changes to Duplex.
However, when the dynamic disk is used, the time required for synchronization depends
on the disk size regardless of whether or not a partition exists. For a 73 GB disk, it takes
about 80 minutes.
If the system is rebooted during synchronization, the process cannot be completed. Do
not restart the system until the synchronization is completed.
Synchronization completed
Source disk
Destination disk
RDR Virtual Disk
DISK ACCESS
LED
Green
(Blinking)
Green
(Blinking)
Windows Setup and Operation 3-23
RDR Utility
Op State: State
Duplex
Duplex
Duplex
Status
None