NEC Express5800/R320a-E4 User Manual page 92

3-22 Windows Setup and Operation
IMPORTANT:
For a disk to be inserted, use a new or physically formatted disk which has the same
capacity as the disk of the corresponding slot (in this example, the disk in slot 1 of the
PCI module 10)
When a disk is inserted, a popup window asking for rebooting the system may be
displayed, but there is no need to reboot it. Select [Restart Later] and close the popup
window.
Insert the replacement disk after waiting for 15 seconds or more after removing a disk.
When the disk is physically formatted and recycled, the inserted disk might be
automatically set to RDR.
Confirm that the DISK ACCESS LEDs and the display of RDR Utility change as shown
3.
below:
Synchronizing
Source disk
Destination disk
RDR Virtual Disk
DISK ACCESS
LED
Amber
(Blinking)
Amber
(Blinking)
RDR Utility
Op State: State
Simplex
Syncing
Simplex
Status
Resync x percent
(x=0, 4, 8, ..., 96)