NEC Express5800/R320a-E4 User Manual page 250

5-90 Installing and Using Utilities
BMC Firmware Update
The firmware of the BMC on the PCI module can be updated.
The BMC firmware can be updated by using the ft server utility.
To update the BMC firmware, the firmware image file must previously be updated on the managed
server. On the BMC firmware update screen, specify the pass of the image file of the firmware to be
updated.
IMPORTANT: Contact your maintenance engineer for the update of the BMC firmware.
Component
BMC –
Remote: Executable from remote management PC by using NEC ESMPRO Manager
Local: Executable on local server by using ft server utility
– : Not supported
Procedure of Update from ft server utility
Update the firmware in the following procedure.
Click [Firmware] - [Firmware...].
1.
[Firmware Update] dialog box appears.
BMC firmware update
Remote
When update to new firmware is required.
Local