HP ExpressCard Hardware Setup Manual page 46

Troubleshooting
Problem
I want to use an external
hard drive, secondary
hard drive, or optional
expansion base hard
drive to store my TV
programs.
A–4
Solution
Perform the following procedure:
1. Be sure your external hard drive is connected
to your computer or optional expansion base.
2. If using an optional expansion base, be sure it
is connected to the computer.
3. Press the Start button on the remote control to
open Windows Media Center.
4. Select Hard Drive.
Then perform either of the following procedures:
1. Press the Start button on the remote control to
open Windows Media Center.
2. Select Tasks > Settings > TV > Recorder >
Recorder Storage.
3. Under Record on drive, select the hard drive
where you want to store your recordings.
4. Select Save.
– or –
1. Press the QuickPlay button on the remote
control to open QuickPlay.
2. Select the TV icon from the menu.
3. Select the i icon from the menu on the left.
4. Under Recording Destination, select the
hard drive where you want to store your
recordings.
All future TV recordings will now be saved to the
external hard drive.
(Continued)
Hardware Setup