HP ExpressCard Hardware Setup Manual page 14

TV tuner setup
Connection 1: Connecting with an antenna
✎
The antenna cable length is not shown to scale.
To install the TV tuner and connect it to the TV tuner antenna:
1. Insert the TV tuner 1 into the ExpressCard slot on the
computer.
✎
2. Connect the TV tuner antenna cable 2 to the TV tuner.
3. Connect the remote sensor to a USB port on the computer.
Refer to
4. Complete the setup of your TV tuner. Refer to
Complete the
✎
For additional connection steps, such as adding a television,
refer to Chapter 4,
3–4
The location of the ExpressCard slot varies by computer
model. Refer to the user guide for your computer.
"Step 3: Connect the remote
setup," later in this chapter.
"Advanced
sensor," for details.
connections."
"Step 4:
Hardware Setup