HP ExpressCard Hardware Setup Manual page 15

Connection 2: Connecting with regular TV or
cable TV without a set-top box
✎
Computer features may vary. Cable lengths are not shown to scale.
To connect the TV tuner to your regular TV or cable TV source
without a set-top box:
1. Insert the TV tuner 1 into the ExpressCard slot on the
computer.
2. Connect the RF coaxial cable adapter 2 to the TV tuner.
3. Connect an RF coaxial cable from the RF coaxial cable
adapter on the TV tuner 3 to your regular TV or cable TV
wall jack 4.
4. Connect the remote sensor to a USB port on the computer.
Refer to
5. Complete the setup of your TV tuner. Refer to
Complete the
✎
For additional connection steps, such as adding a television, refer
to Chapter 4,
Hardware Setup
"Step 3: Connect the remote
setup," later in this chapter.
"Advanced connections."
TV tuner setup
sensor," for details.
"Step 4:
3–5