HP ExpressCard Hardware Setup Manual page 16

TV tuner setup
Connection 3: Connecting with satellite TV or
cable TV with a set-top box
✎
Refer to your cable or satellite set-top box user guide for the exact
location and labeling of components.
✎
Computer features may vary. Cable lengths are not shown to scale.
To connect the TV tuner to your existing satellite TV or cable TV
source with a set-top box:
1. Connect an RF coaxial cable from your cable or satellite TV
wall jack 1 to the TV-In jack on your cable or satellite set-top
box 2.
2. Connect an RF coaxial cable from the TV-Out jack 3 on your
cable or satellite set-top box to the RF coaxial cable
adapter 4.
✎
3. Connect the RF coaxial cable adapter 5 to the TV tuner.
4. Insert the TV tuner 6 into the ExpressCard slot on the
computer.
3–6
For improved video quality you can connect your set-top
box to the TV tuner using a composite video or S-Video
cable instead of an RF coaxial cable. Refer to Chapter 4,
"Advanced connections," for instructions.
Hardware Setup