Table of Contents
Advertisement
1.4 The Back Panel
1
Back Panel Components
1.
Cooling Fan: Do not obstruct.
2.
Power Connector, Voltage Selector and On/Off Switch.
3.
IEEE-1394 Firewire Ports 1 and 2.
4.
10/100 Ethernet Port.
5.
SCSI Ports 1 and 2.
6.
Dip Switches (SW1).
7.
RS-232 Port.
8.
Alarm Out Relay Connection (Future feature).
1.5 Connections
10/100 Ethernet Port
The Ethernet port is used to connect
the DVSe into a network
environment.
SCSI Ports 1 and 2
Connect a SCSI device to one of the
two SCSI ports. Set the dip switches
(SW1) on the back panel. Set SCSI
Termination and SCSI Power to On
and use the Bus Select menu option
to enable this feature.
The unit does not currently support multiple SCSI device connections.
Caution! Ensure the power to DVSe is OFF BEFORE
connecting any SCSI or 1394 devices. Do not attempt to use
DVSe
ETHERNET
10/100
IEEE-1394
PORT 1
PORT 2
2 2 2
3
4
Wire Type: Cat 5.
Connector Type: RJ-45.
Cable Required: Ethernet.
Connector: 50 pin, high density SCSI-2.
Gender (on unit): Female.
SCSI ID: 0.
6
OFF
1 2 3 4
ON
1: SCSI TERMINATION
2: SCSI POWER
3: BUZZER
4: AUX
SCSI
SW 1
PORT 1
PORT 2
OFF
ON
5
6
RS-232
RELAY
7
8
0150-0178H
Advertisement
Table of Contents
