Power-Up; Setup Menu - GE Digital Video Storage System User Manual

3.2 Power-Up

Select the correct voltage before supplying power to the unit. Use the voltage
selector switch located on the back panel of the unit, between the power
connector and the On/Off Switch.
Caution! Applying incorrect voltage will damage unit.
Once the correct voltage has been selected and all connections have been
made, connect the power cable suited to your geographic location. Apply power
to the unit.

3.3 Setup Menu

The Setup menu provides setup options for the following features:
•
Ethernet enable/disable.
•
Bus Select: SCSI/1394
•
Auto Delete Mode.
•
IP Address.
•
Subnet Mask Address.
•
Default Gateway Address.
•
Date/Time Setup.
NOTE
Menus will automatically be exited after 30 seconds of inactivity.
NOTE
Access to menu is only allowed when the DVSe is Offline, i.e. the
DVSe is not presently archiving or connected via ethernet.
Press the Enter Button to access the first menu.
Ethernet Enable
Select ethernet enable, yes or no. Default
setting is no.
Bus Select
Select from SCSI or 1394 to enable. Default
setting is 1394.
DVSe 16 0150-0178H