Samsung SPE-101 User Manual page 43

IP filtering
You can create a list of IPs that you want to grant or deny access to them.
1. From the Setup menu, select the
<Network ( )> tab.
2. Click <IP filtering>.
3. Select a <Filtering type>.
 Deny : If selecting this, access from
those IPs that are added to the
filtering will be restricted.
 Allow : If selecting this, access from
only those IPs that are added to the
filtering will be accepted.
4. Provide the IP that you want to grant or
deny access from.
For IPv4, the default IP address is
0.0.0.0, and the default prefix is 32.
5. Select desired IP address to be approved or rejected from the entered IP addresses.
Only the selected IPs are filtered out.
6. When done, click [Apply (
SSL
You can select a secure connection system or install the public certificate for this purpose.
1. From the Setup menu, select the
<Network ( )> tab.
2. Click <SSL>.
3. Select a secure connection system.

To access the network video encoder using
HTTPS mode, you have to type the IP address
for the network video encoder in the form of
"https://<Network video encoder_IP>".
4. Search for the public certificate that you want to install on the network video en-
coder.
To install the certificate on the network video encoder, you need to provide a certifi-
cate name (it can be arbitrarily assigned by the user), certificate file issued from the
certification authority and a key file.

The <HTTPS(Secure connection mode using the public certificate)> item will be active only if
there exists a public certificate installed.
5. When done, click [Apply (
)].
)].
English _43