Samsung SPE-101 User Manual page 51

Upgrade / Reboot
1. From the Setup menu, select the
<System ( )> tab.
2. Click <Upgrade / Reboot>.
3. Select a desired item and set it
appropriately.
 Upgrade : Performs upgrading the
system.
 Factory default : Resets the system
to the factory default.
- Except network parameter :
Reset the other settings except for the network settings.
- All : Resets all settings including the network video encoder settings. (however,
the log information will not be reset)

The IP addressing system will be defaulted to DHCP if you reset the network video encoder. If no
DHCP server is found, the previous settings will be restored automatically.
 Configuration backup & Restore : Backs up the current system settings before
performing the restoration process. The system is automatically restarts after
backup or restoration.
 Restart : Restarts the system.
4. When done, click [Restart (
To perform the upgrade
1. Click [Upgrade].
2. Click [Browse] and specify a file to
upgrade.
3. Click [Send].
4. The "Upgrade" dialog appears where
the progression will be shown in the
bottom.

M
If you forcibly terminate the upgrade
process, upgrade will not be completed
properly.
)].
English _51