Table of Contents
Advertisement
5.
Select the desired network, and then press the
6.
On the Security screen, enter your network's Security Code or Pass Phrase.
Enter numbers directly using the number buttons on your remote control. Enter
letters by selecting a letter with an arrow button, and then pressing
"
To view the password as you enter it, use the arrow buttons to select
Password
7.
When finished, select
the network connection and then connects to the network.
8.
When verification is complete, select OK, and then press the
"
You should be able to find the Security Code or Pass Phrase on one of the set up
screens you used to set up your router or modem.
Wireless - Manual
If you have a static IP address or the Automatic procedure does not work, you'll
need to set the
Network Settings
1.
Follow the directions in Wireless - Automatic through Step 5.
2.
The product searches for a network, and then displays the connection failed
message.
3.
On the bottom of the screen, select
The
IP Settings
4.
Select the IP Setting field, and then press the
5.
Select
Enter manually
6.
Select a value to enter
Use the number keypad on your remote control to enter the numbers for the
value. You can also enter numbers using the ▲▼ buttons. Use the ◀▶ buttons
on the remote control to move from entry field to entry field within a value.
When done with one value, press the
7.
Press the ▲ or ▼ button to move to another value, and then enter the numbers
for that value following the instructions in Step 6.
on the right side, and then press
Done
and then press the
screen appears.
in the IP Setting field, and then press the
(IP
Address, for example), and then press
E
button.
values manually.
IP
Settings, and then press the
E
button.
E
button.
E
button. The product verifies
E
E
button.
E
button.
Show
button.
E
button.
E
button.
E
button.
Hide quick links:
Advertisement
Table of Contents
