Manual Tuning
Scans for a channel manually and stores in the product.
When scanning has finished, channels are updated in the channel list.
Transfer Channel list
This function can import or export the channel map.
You should connect a USB storage to use this function.
●
Import from USB
●
Export to USB
"
If you set the country to Netherlands and Antenna source set to cable, this menu will
not appear.
Delete CAM operator profile
Select this menu to delete the CAM operator profile.
Satellite System
Configure settings for your satellite equipment.
●
Satellite Selection
●
LNB Power
: Enable or disable LNB Power supply from receiver.
●
LNB Settings
●
SatCR/Unicable Settings
"
Depending on your country, this menu function may not be supported.
●
Positioner Settings
●
Reset All Settings
Try Now
: Import channel list from USB.
: Export channel list to USB.
For H8509S, H8909S model
: Choose one or more satelites for your product.
: Configure parameters for your satelite equipment.
: Configure single cable installation.
: Configure the settings for your aerial positioner.
: Restrore all settings to defaults.
Try Now
Except for H8500A, H8900A model