Index Types - Siemens HydroRanger 200 Instruction Manual

Index types

Name
Global
View only
Breakpoint
Dimension
Discrete Input
Echo Profile
1
Level
1
mA input
1
mA output
Comm. Port
Relay
2
Transducer
1.
HydroRanger 200 [1 or 3 relay model]: This model is only a single point
device, therefore the level point index is always 1.
HydroRanger 200 [6 relay model]: The three level points are: transducer
1, transducer 2, and the calculated point which can be difference
(P001=4) or average (P001=5).
Level point typically has 1 index in Single Point Mode (standard), and 2
indexes in Dual Point Mode (optional). A third index is available in both
modes when Operation (P001) is set for DPD (P001=4) or DPA (P001=5).
2.
HydroRanger 200 [6 relay model]: The number of indexes available in
Single Point Mode (standard) is typically 1, but can be expanded to 2 if
Operation (P001) is set for DPD (P001=4) or DPA (P001=5).
In Dual Point Mode (optional), the number of available indexes is
always 2.
Page 116
This parameter applies to the entire unit
This parameter can not be set, only viewed
Indexed by breakpoint
Indexed by PMD dimension
Indexed by discrete input
Indexed by stored echo profile
Indexed by level point
Indexed by mA input
Indexed by mA output
Indexed by communications port
Indexed by relay
Indexed by transducer
HydroRanger 200 – INSTRUCTION MANUAL
Description # of indexes
n/a
n/a
Parameter
dependent
up to 7
2
10
1, 2 or 3
1
0 or 2
2
1, 3 or 6
1 or 2
7ML19985FC03