Konica Minolta IC-206 User Manual page 60

3
10
Select "Specify a location" and then specify the following folder on the
CD-ROM as the location where the driver is saved.
– Folder to be specified: \Driver\Win98_ME\English
– The folder can be selected after clicking the [Browse] button.
11
Click the [Next] button.
12
Check the location of the driver, and then click the [Next] button.
A dialog box appears, indicating that the installation is finished.
13
Click the [Finish] button.
This completes the installation of the USB-compatible device driver.
The Add New Hardware Wizard appears again, and the installation of
the TWAIN driver for scanning begins.
14
Repeat steps 8 through 13 to install the TWAIN driver.
This completes the installation of the TWAIN driver.
The Add New Hardware Wizard appears again, and the installation of
the printer driver begins.
15
Repeat steps 8 through 12 to install the printer driver.
A dialog box appears, allowing you to specify the printer name.
16
Click the [Finish] button.
– To change the printer name, type in the new name.
– To set this machine as the default, select "Yes".
A dialog box appears, indicating that the installation is finished.
17
Click the [Finish] button.
This completes the installation of the printer driver.
3-16
Installing the printer driver
IC-206