Ip Address Setting - Konica Minolta IC-206 User Manual

4
5
In the "NETWORK SETTING" menu, press the [,] or [+] key until "IP
ADDRESS SETTING" is selected, and then press the [OK] key.
6
Press the [,] or [+] key until "AUTO" or "SPECIFY" is selected, and
then press the [OK] key.
– If "AUTO" was selected, the IP address will automatically be
obtained from the DHCP server. After the message "ACCEPTED"
appears, the "NETWORK SETTING" menu appears again.
– If "SPECIFY" is selected, a screen appears, allowing you to specify
the IP address. Continue with step 7.
– "AUTO" is available only if a DHCP server is on the network. If
"AUTO" is selected, it will not be necessary to specify the subnet
mask or gateway settings.
4-14
NETWORK SETTING

IP ADDRESS SETTING

DNS CONFIG.
WEB SETTING
IP ADDRESS SETTING
AUTO
SPECIFY
Network printing
IC-206