1. Manuals
  2. Brands
  3. Bosch Manuals
  4. Security Camera
  5. VEZ IP Series
  6. Installation manual

Bosch VEZ IP Series Installation Manual

Autodome easy ip
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
AutoDome Easy IP
VEZ IP Series
en
Installation Manual

Advertisement

Table of Contents
loading

Related Manuals for Bosch VEZ IP Series

Summary of Contents for Bosch VEZ IP Series

  • Page 1 AutoDome Easy IP VEZ IP Series Installation Manual...

  • Page 3: Table Of Contents

    Connecting the Alarm Input Mounting Installation Installing the Wall Mount Installing the Pipe Mount 6.2.1 Installing the Base to a Metal Junction Box 6.2.2 Powering On Setting Protocol and Video Format Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 4 Alarm Menu 10.5.1 Configuring the Alarm for IP Alarm Features 10.5.2 Releasing an Alarm 10.6 Camera Setup Menu 10.6.1 Focus Control Menu 10.6.2 WB Control Menu 10.6.3 AE Control Menu F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 5 12.4 Storage Medium Menu 12.5 iSCSI Menu 12.6 Partitioning 12.6.1 Viewing the Partition Status 12.6.2 Creating A Partition 12.6.3 Editing a Partition 12.6.4 Deleting Recordings 12.6.5 Deleting all Partitions Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 6 Service Main Menu 12.10.1 Network Menu 12.10.2 Multicasting 12.10.3 Encryption 12.10.4 Version Information 12.10.5 Livepage Configuration 12.10.6 Licenses 12.10.7 Maintenance Keyboard Commands by Number Preventive Maintenance 14.1 Spare Parts List Troubleshooting F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 7: Safety

    Lightning - For added protection during a lightning storm, or when leaving this unit unattended and unused for long periods, unplug the unit from the wall outlet and disconnect the cable system. This will prevent damage to Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 8 For 24 VAC units, voltage applied to the unit's power input should not exceed ±10% or 26.4 VAC. User- supplied wiring must comply with local electrical codes (Class 2 power levels). Do not ground the F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 9 17. Attachments, changes, or modifications - Only use attachments/accessories specified by the manufacturer. Any change to or modification of the equipment not expressly approved by Bosch could void the warranty or, in Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 10: Safety Precautions

    3 mm in each pole, into the electrical installation of the building. If it is needed to open the housing for servicing and/or other activities, use this all-pole F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 11 NOTICE! This device is intended for use in public areas only. U.S. federal law strictly prohibits surreptitious recording of oral communications. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 12 Please dispose of these units at an environmentally compatible recycling facility, in line with European Directive 2002/96/EC. Environmental statement - Bosch has a strong commitment to the environment. This unit has been designed to respect the environment as much as possible.
  • Page 13 Network Voltage (TNV) circuits. Video loss - Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of lost digital information, Bosch Security Systems recommends multiple, redundant recording systems, and a procedure to back up all analog and digital information.
  • Page 14 (modèles utilisés aux États-Unis et au Canada uniquement) Ce produit est conforme aux normes FCC partie 15. La mise en service est soumises aux deux conditions suivantes: – cet appareil ne peut pas provoquer d'interférence nuisible F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 15 UL has only tested fire, shock and/or casualty hazards as outlined in UL's Standard(s) for Safety for Closed Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 16 CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING-RELATED FUNCTIONS OF THIS PRODUCT. Copyright This user guide is the intellectual property of Bosch Security Systems, Inc. and is protected by copyright. All rights reserved. Trademarks All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.

  • Page 17: Customer Support And Service

    AutoDome Easy IP Safety | en Customer Support and Service If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions. Service Centers Telephone: 800-366-2283 or 585-340-4162 Fax: 800-366-1329 E-mail: cctv.repair@us.bosch.com...
  • Page 18 | Safety AutoDome Easy IP F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 19: Unpacking

    – Verify that all the parts listed in Section 2.1 Parts List, page 13 are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative. – The original packing carton is the safest container in which to transport the unit and must be used if returning the unit for service.

  • Page 20: Safety Rules

    Do not use the device in the presence of inflammable substances. – Do not allow children or unauthorized personnel to use the device. – Do not block any ventilation openings. – Keep this manual for future reference. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 21 AutoDome Easy IP Unpacking | en Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 22: Description

    DVR (see Figure 3.1 for a sample configuration). Figure 3.1 System configuration Description 1 Power supply 2 PC 3 Ethernet over CAT 5E or CAT 6 cable F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 23 AutoDome Easy IP Description | en Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 24: Preparing The Wiring

    12 VDC input 12 W 237 ft 149 ft 94 ft (72 m) (45 m) (29 m) Power connections Follow the instructions in the table below to terminate the two (2) power connections: F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 25: Alarm

    0.644 152.4 1.024 243.8 Alarm connections Follow the instructions in the table below to terminate the two (2) alarm connections: Wire color Description Blue Alarm Common Violet Alarm In Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 26: Connections

    If connecting to the 24 VAC power input, connect the red lead to one power input lead. Then connect the orange lead to the other power input lead. NOTICE! Use certified/listed Class 2 power supply transformer only. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 27: Connecting The Alarm Input

    Connect the alarm out of the alarm source dry contact to the violet wire (alarm input). Figure 5.1 N.O. - Normally Open Alarm Connections Reference Description Dry Contact Alarm Common (blue wire) Alarm Input (violet wire) Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 28: Mounting Installation

    Feed the wires through the conduit. Feed all wires from the metal junction box through the arm. Attach the mounting cap to the arm. Fit the arm to a metal single-gang junction box. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 29 NOTICE! The metal junction box and mounting surface must be capable of supporting a maximum load of 11.33 kg (25 pounds). Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 30 (180 degrees), as shown in Figure 6.4. Figure 6.4 Attaching the mounting plate to the dome cap F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 31 Rotate the camera approximately 15 degrees to the right and lock into place, as shown in the illustration below. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 32: Installing The Pipe Mount

    Drill a fifth hole (maximum of 20 mm) in the center of the four-hole pattern used to mount the flange. Use this hole to feed the wires through the mount. Screw the conduit clamp provided into the mounting flange. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 33 Secure the flange using four (4) appropriate user-provided fasteners such as Moly or Toggle bolts. Attach the grounded metal conduit. Figure 6.8 Grounded metal conduit Pull the wires from the pipe, starting at the flange end. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 34 Ensure that the mounting plate's front end, as labeled on the plate, is screwed to the first front thread, as shown in Section Figure 6.10 Attaching the mounting plate to the dome cap, page 29. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 35 12. Connect all wires to the camera. Ensure that the female RJ45 connector on the camera's cable assembly is positioned between the mounting plate and the dome mounting cap. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 36 Figure 6.12 Attaching the AutoDome Easy IP to the mounting plate 14. Secure the safety locking screw with the locking torx wrench (T-10) supplied with the AutoDome Easy IP. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 37 Ensure that the female RJ45 connector on the camera's cable assembly is positioned within the grounded metal junction box. Align the two (2) screws (not provided) with the grounded metal junction box and secure the dome. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 38: Powering On

    WARNING! Before powering the dome on, remove the blue round packing foam between the PTZ and the bubble, and the clear protective plastic sheet on top of the bubble. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 39 AutoDome Easy IP Mounting Installation | en Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 40: Setting Protocol And Video Format

    Switch 8 - set to match the video standard of the camera model; NTSC (60 Hz) ON – or – PAL (50 Hz) OFF. Switches 9 and 0 - set to Bosch protocol. NOTICE! The error message: PROTOCOL IS NOT MATCHED is displayed during the power-up cycle if switches 9 and 0 are not set correctly.
  • Page 41 Setting Protocol and Video Format | en NOTICE! Do not adjust the S/W no. 8 NTSC and PAL video standards. The switch setting must agree with the video standard model purchased. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 42: Configuring Ip Communications

    UDP and IGMP V2 protocols as a prerequisite for multicasting. Configuration Allows configuration for all camera settings from a web browser on the local network (Intranet) or on the Internet. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 43 Allows you to take and store individual video images as JPEG files from the web browser interface. Backup Saves video images as a file on a computer's hard drive from the web browser interface. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 44: System Requirements

    An H.264-compatible Bosch hardware decoder such as a receiver and a connected video monitor. If you choose to use a computer running Microsoft Internet Explorer or any of the Bosch software, the computer must conform to the following minimum requirements: –...

  • Page 45: Ip Network Address Requirements

    AutoDome Easy IP images from a web browser. Connecting the AutoDome Easy IP to the Install the AutoDome Easy IP according to the instructions presented earlier in this Installation Manual. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 46: Installing The Required Software

    To view live video, proceed as follows: Download the most recent version of all required software by going to www.boschsecurity.com. When the homepage is displayed, click on your location, then select your country. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 47: Changing The Network Settings/Ip Address

    (if required) from www.boschsecurity.com and follow the on-screen instructions. Note: If required, .NET 2.0 must be installed before the Configuration Manager. 8.6.2 Using the Configuration Tool To use the configuration tool, proceed as follows: Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 48: Using The Autodome Easy Ip Web Server

    Programs, VIDOS, and clicking Configuration Manager. The Configuration Manager automatically scans the network for all Bosch Video over IP (BVIP) products. A list of detected devices is displayed within the Network tab. Right-click the appropriate device within the Network tab.
  • Page 49 Click the Settings link, located at the top of the Livepage. Click the Service link, located in the left-hand pane of the Settings window. Click the Network link to open the Network Settings page. Figure 8.3 Network Settings page Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 50 Depending on the PC network security settings, the user may have to add the new IP address to the browser's trusted sites list for the AutoDome Easy IP controls to operate. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 51 AutoDome Easy IP Configuring IP Communications | en Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 52: Viewing Live Images And Controlling The Ptz

    In addition, the camera offers a Motion JPEG (M-JPEG) option. M-JPEG is a video format that uses JPEG picture compression in each frame of the video. Click F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 53: Controlling Camera Operations

    View Control tab The following figure illustrates the View Control tab and the actions that you can initiate from the tab: Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 54 Move the camera to preset shot numbers 1, 2, 3, 4, 5, and 6 1. This function is also accessible by using the mouse scroll wheel while in the live video frame. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 55 AutoDome Easy IP and the connection. The Event Log field contains information about alarm conditions. The following figure illustrates the System and Event logs. Figure 9.4 System and Event logs Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 56: Entering A Keyboard Control Command

    Keypad (numbers 0-9) Show a preset shot Set a preset shot Initiate a command Delete a number in the command number field OK button (not used) Stop a command F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 57 To verify the next number in the sequence, enter the Preset menu and scroll through the saved presets. The last number displayed is the next available preset position. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 58 DATA NOT PROGRAMMED. WARNING! For more information about the AutoDome Easy IP settings and controls, click the link to open the AutoDome Easy IP online Help. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 59 AutoDome Easy IP Viewing Live Images and Controlling the PTZ | en 53 Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 60: Navigating The Menus

    OSD, auto pivot, inactivity function, and initialization (reset all OSD menu settings to factory defaults). Note: Web server menu settings will not be reset. Exit Exits the menu. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 61: Preset Menu

    Indicates a preset shot has not been saved for the number under which it is displayed. Save and exit Saves the data and exits the menu. Exit W/O save Exits the menu without saving the data. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 62: Setting And Saving Presets

    If the user attempts to recall a shot that has not been preset, the following error message is displayed: DATA NOT PROGRAMMED F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 63: Creating Titles

    The letter stops blinking. Press the zoom button two (2) times and the cursor moves to the next character position. Repeat the same process until you Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 64: Tour Menu

    AutoDome Easy IP camera. Delete data Deletes the previously saved tour. Save and exit Saves the data and exits the menu. Exit W/O save Exits the menu without saving the data. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 65: Setting A Tour

    The number stops blinking. Press the zoom in button once and repeat. 11. When satisfied with the preset tour, select SAVE AND EXIT. To exit without saving, select EXIT W/O SAVE. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 66: Running/Stopping A Tour

    AutoDome Easy IP runs the auto pan tour (must be user-defined via the Title OSD). See 10.1.3 Creating Titles. Start point Sets the left pan limit to start panning. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 67: Setting Auto Pans

    Press the Aux Control tab then press 5 + Aux On via the on- screen keypad to gain access of the CONTROL. Toggle back to the View Control tab and use the on-screen joystick to select the camera’s tilt and zoom. When Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 68: Run Auto Pan

    10.4 Sector Menu The sector function provides access to customizing individual sectors and titles. The factory default is eight (8) evenly spaced sectors with titles from SECTOR1 to SECTOR8. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 69 Sector 2: 90 Sector 3: 135 Sector 4: 180 Sector 5: 225 Sector 6: 270 Sector 7: 315 Sector 8: 360 Delete data Deletes the data for the currently selected sector. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 70: Alarm Menu

    MAIN MENU ALARM MENU PRESET INPUT: NO TOUR OPTION: LATCHED AUTO PAN PRESET: 05 SECTOR DWELL TIME ALARM SAVE AND EXIT CAMERA SETUP EXIT W/O SAVE DOME SETUP EXIT F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 71 Exits the menu without saving the data. save NOTICE! The PTZ control is disabled when an active alarm is pending and is restored when the user acknowledges the alarm. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 72: Configuring The Alarm For Ip Alarm Features

    Figure 10.1 Alarm Sources dialog box 10.5.2 Releasing an Alarm When releasing an alarm, there are two (2) modes of operation. Time out releases the alarm after the dwell time. However, time F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 73: Camera Setup Menu

    CAMERA SETUP MENU FOCUS CONTROL MENU FOCUS CONTROL MODE: SPOT WB CONTROL DISTANCE: 0.1M AE CONTROL DIGITAL ZOOM: OFF L/L CONTROL SAVE AND EXIT PICTURE EXIT W/O SAVE INITIALIZE CAMERA EXIT Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 74 Digital Activates the digital ON - Provides an additional 10x zoom imaging technology digital zoom. to increase the range OFF - Turns off digital zoom. beyond the optical zoom. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 75: Wb Control Menu

    CAMERA SETUP MENU WB CONTROL MENU FOCUS CONTROL MODE: AUTO WB CONTROL R GAIN: AE CONTROL B GAIN: L/L CONTROL SAVE AND EXIT PICTURE EXIT W/O SAVE INITIALIZE CAMERA EXIT Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 76 Manual mode. Save and Saves the data and exits the menu. exit Exit W/O Exits the menu without saving the data. save F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 77: Ae Control Menu

    AE CONTROL MENU FOCUS CONTROL MODE: AUTO WB CONTROL IRIS: AE CONTROL GAIN: L/L CONTROL SHUTTER: PICTURE BRIGHT: 30 INITIALIZE CAMERA BACK LIGHT: OFF EXIT SAVE AND EXIT EXIT W/O SAVE Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 78 Available with iris PRI and Manual mode only. Gain Electronics that Allows a range of 0-30. regulate the gain or amplification of the video signal. Available in Manual mode only. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 79: L/L Control Menu

    The L/L Control menu provides access to the external and internal sync modes. CAMERA SETUP MENU L/L CONTROL MENU FOCUS CONTROL MODE: INTERNAL WB CONTROL PHASE: AE CONTROL SAVE AND EXIT L/L CONTROL EXIT W/O SAVE Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 80: Picture Menu

    CAMERA SETUP MENU PICTURE MENU FOCUS CONTROL MIRROR: OFF WB CONTROL SHARPNESS: 09 AE CONTROL SAVE AND EXIT L/L CONTROL EXIT W/O SAVE PICTURE INITIALIZE CAMERA EXIT F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 81: Initialize Camera Menu

    LANGUAGE: ENGLISH TOUR OSD DISPLAY: OFF AUTO PAN AUTO PIVOT: ON ALARM HOME FUNCTION CAMERA SETUP INITIALIZE DOME DOME SETUP DOME INFORMATION EXIT SAVE AND EXIT EXIT W/O SAVE Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 82 Initialize Resets to the default YES, NO dome settings for all OSD menus. Note: Does not reset the web server menu settings. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 83: Setting The Language

    Setting the language, page 77). The Language screen is displayed. Select the Website Language drop-down list to select the appropriate language, then press Set. Figure 10.2 Setting the language Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 84: Inactivity Function

    Preset - Preselects and stores a combination of pan, tilt, and zoom positions that allow a set view to be recalled. Also known as preset shot. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 85: Initialize Dome Menu

    DOME INFORMATION SAVE AND EXIT EXIT W/O SAVE 10.10.1 Dome Information Menu The Dome Information menu displays the firmware version. DOME SETUP MENU DOME INFORMATION LANGUAGE: ENGLISH VERSION: 2.0.0 Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 86 | Navigating the Menus AutoDome Easy IP OSD DISPLAY: OFF EXIT AUTO PIVOT: ON HOME FUNCTION INITIALIZE DOME DOME INFORMATION SAVE AND EXIT EXIT W/O SAVE F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 87: Recording Menus

    Settings menu. The Recordings link is only visible if a Storage Medium has been selected. NOTICE! NOTE: The recording feature requires a Bosch storage medium (supplied separately) such as the iSCSI to be used in conjunction with the AutoDome Easy IP.

  • Page 88: Controlling Playback

    Figure 11.2 Recording Playback Features Reference # Description Time bar for quick orientation. Indicates the position of the image currently being played back within the sequence. Pauses playback. Starts playback. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 89: Printing A Screenshot

    To view and print saved screenshots, do the following: Click preview in the Screenshots area. A new window is displayed. Click the Print button to start the printing process. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 90 | Recording Menus AutoDome Easy IP Click the close button X in the window title bar to close the window. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 91: Settings Menus

    Figure 12.1 Settings Link 12.1 General Main Menu The General main menu contains the following submenus: Identification, Display Stamping, Password, Language, Date/ Time, and Time Server. Figure 12.2 General Submenus Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 92: Identification Menu

    Display Stamping. The Display Stamping screen is displayed. Select an option from the Camera Name Stamping drop- down list and/or the Time Stamping drop-down list. Click the Set button. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 93 Custom The firmware allows the user to specify the location of the specified information on top of the video image within a 0-255 XY range. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 94: Password Menu

    – Live Represents the lowest authorization level. It can only be used to view the live video image and switch between the different live image displays. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 95: Language Menu

    (see also Section 10.8.1 Setting the Language). Figure 12.7 Language Menu 12.1.5 Date/Time Menu To select the desired Date/Time format, click the drop-down menu, make your selection, then click the Set button. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 96: Time Server Menu

    (RFC 868) and then use it to set the internal clock. The device calls up the time signal automatically every ten (10) minutes. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 97 Selects the time zone in which the system is Zone located. Daylight Select this during daylight savings time if the time Saving change is to be taken into account. Time Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 98 Upon deleting an entry, the user can add new data by marking the row and selecting required values from the list fields. Click the OK button to save and activate the table. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 99: Encoder Main Menu

    (i.e. switching to summer time and back to normal time). 12.2 Encoder Main Menu The Encoder main menu contains the following submenus: Picture Settings, Encoder Profile, and JPEG Posting. Figure 12.11 Encoder Submenus Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 100: Picture Settings Menu

    The Profile name indicates the highest level of priority. For example, Profile 3 has low data rate and low resolution and Profile 1 has high data rate and high resolution. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 101: Profile Configuration

    The profiles should only be changed if you are familiar with all configuration options. To change individual parameter values within a profile, the user can switch between profiles by clicking the associated tabs. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 102 The value entered here should be at least 10% higher than the value entered in the Target data rate field. I-frame This parameter determines the number of inter-coded frames Distance between two I-frames. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 103 (reduced sharpness) under certain circumstances. It is recommended to use the debocking filters at low data rates. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 104: Jpeg Posting Menu

    FTP server at certain intervals. The user can then retrieve these images at a later date to reconstruct alarm events if required. Figure 12.14 JPEG Posting Menu F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 105 Allows the user to enter the IP address of the FTP server to save the JPEG images to. FTP Server Login Allows the user to enter the login name for the FTP server. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 106: Recording Main Menu

    Storage Medium Menu The Storage Medium menu allows the user to select an iSCSI system storage medium to configure the recording parameters. Otherwise, set to Off. Figure 12.16 Storage Medium Menu F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 107: Iscsi Menu

    If you select the iSCSI server as the storage medium, you will need to set up a connection to the desired iSCSI storage device (Bosch product supplied separately) and set the configuration parameters. For long-term, authoritative images, it is essential that you use appropriately sized iSCSI storage.
  • Page 108 Initiator Extension Used to enter the initiator extension. For clarity, enter a name or the existing extension with a comment, for example “– Camera 2". Figure 12.17 iSCSI Menu F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 109 Automatically displayed after a connection has been established. Initiator Extension Used to enter the initiator extension. For clarity, enter a name or the existing extension with a comment, for example “– Camera 2". Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 110 Figure 12.19 iSCSI dialog box Storage Information The status of the currently selected storage medium and the data throughput are displayed here for information. You cannot change any of these settings. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 111: Partitioning

    All four (4) potential partitions need to be configured in order to record four (4) cameras. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 112 Click the Recording drop-down list, then click Partitioning. The AutoDome Easy IP displays the Partitioning screen. Click the Create partition button. The AutoDome Easy IP displays the Create new partition screen. Click the drop- F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 113 The Recording Scheduler must be stopped before creating a partition. Figure 12.22 Identifying the Number of Partitions Type a unique name within the Partition name field, then click Next. Figure 12.23 Assigning a Partition Name Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 114 Select a value for the Pre-alarm profile, the Pre-alarm time, the Post-alarm profile, and the Post-alarm time. Then, click Set to save your settings. Figure 12.25 Calculation of Alarm Track Size F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 115 Select one of the following methods to specify the partition size: – Type the Total partition size (see Figure 12.27), then click Finish. The AutoDome Easy IP returns you to the Partitioning screen. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 116 AutoDome Easy IP Figure 12.27 Partitioning Size – Click the Calculate button (see Figure 12.27). The AutoDome Easy IP displays Calculation of parti- tion size screen. Figure 12.28 Calculating Partition Size F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 117: Viewing The Partition Status

    Figure 12.29 Viewing a Partition Click the Partition status button. The AutoDome Easy IP displays the Partition status screen. Figure 12.30 Partition Status To view other partitions, click the << and >> buttons. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 118: Creating A Partition

    To edit a partition, do the following: Open the AutoDome Easy IP Livepage, then click the Settings link. Click the Recording drop-down list, then click Partitioning. The Partitioning window is displayed. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 119 128 alarm recordings. Click the Set button when finished. CAUTION! Alarm tracks must be set up in the required partition for alarm recording. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 120: Deleting Recordings

    Click the Delete all partitions button. The display retains  the lines containing the numbers, the partition names are deleted and 0 is specified as the size in each case. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 121: Recording Profiles

    [Ctrl] key. Click the Standard Profile drop-down list and select the encoder profile to be used for continuous recording. The Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 122: Recording Scheduler

    In addition to the normal weekdays, you can define holidays that are not in the standard weekly schedule on which recordings are to apply. This feature allows you to apply a F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 123 Click the Select all button to link all time intervals to the selected profile. Click the Clear all button to deselect all of the intervals. Click the Set button to save the settings in the unit, then click Start. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 124: Holidays

    Assign the individual holidays to the recording profiles, as described in Figure 12.32, page 115. 12.8.2 Deleting Holidays To delete holidays which have been defined by a user, do the following: F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 125: Time Periods

    12.9 Alarm Menu The Alarm main menu contains the following submenus: Alarm Sources, Alarm Connections, Alarm E-Mail, and Alarm Task Editor. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 126: Alarm Sources

    Figure 12.36 Alarm Connections Menu To connect an alarm, do the following: Open the AutoDome Easy IP Livepage, then click the Settings tab. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 127 Remote port parameter. 12. Click the Audio-connect drop-down list and select On if an active connection should be reestablished automatically to one of the specified IP addresses after each restart. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 128: Sending An Alarm E-Mail

    Mail server IP address field. Type the SMTP user name and SMTP password necessary to access the e-mail server. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 129: Service Main Menu

    Check the Always Trust box, then click YES. Click the Settings link, located at the top of the LivePage. Click the Service Settings link, located in the left pane of the Settings window. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 130 Address to access the LivePage. 12. Disconnect the AutoDome Easy IP Ethernet cable from the dedicated network switch and reconnect the Ethernet cable to the local area network (LAN). F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

  • Page 131: Multicasting

    Type a value to assign different port addresses for each AutoDome Easy IP unit. You must use different port addresses if simultaneous data streams utilize the same Multicast IP address. – Streaming Check the box to enable Multicasting. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 132: Encryption

    If you delete a key, the data for this channel will be transferred unencrypted. Note: The encryption of video data requires increased computing power. To enable encryption, do the following: Open the AutoDome Easy IP Livepage, then click the Settings link. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 133 Click Edit to enter a key for a selected entry. Automatic Key Interchange Check the box to activate automatic key interchange between two units (or unit and software decoder) over a secure connection. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 134: Version Information

    The file paths must correspond to the access mode (for example C:\Images\Logo.gif for access to local files or http:// www.bosch.com/images/logo.gif for access via the Internet or Intranet). Company Logo Type the fully-qualified path to a background graphic. If you do not know the path, click Browse and navigate to the image file.
  • Page 135 Type the path for the storage location of individual images and video sequences that you can save from the Livepage. If necessary, click Browse to find a suitable directory. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 136: Licenses

    The automatic installation allows you to remotely service and update the device. You can obtain the current firmware from customer service or from www.boschsecurity.com. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 137 Search and navigate to the file. Ensure that the configuration file is from the same type of device that you want to reconfigure. Click Upload to begin transferring the file to the device. Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 138 Once all files have been successfully uploaded, reboot the unit. In the address field of the browser, type /reset after the AutoDome's IP address (for example 192.168.0.10/reset). Figure 12.45 Maintenance Menu F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 139 AutoDome Easy IP Settings Menus | en 133 Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 140: Keyboard Commands By Number

    Activates auto pan 1-4. Shot Aux On/ Accesses submenus Accesses PTZ control for Aux Off start point, tilt and zoom, and end point in the Auto Pan and Sector menus. F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 141 AutoDome Easy IP Keyboard Commands by Number | en 135 Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...

  • Page 142: Preventive Maintenance

    Wipe housing with a clean, damp cloth. Clean P.C (LEXAN) dome/windows with an approved P.C (LEXAN) cleaner (Novus LEXAN cleaner-plastic polish). Verify that all the mounting hardware is secure. F01U079609 | 1.0 | 2008.07 Installation Manual Bosch Security Systems, Inc.
  • Page 143 AutoDome Easy IP Preventive Maintenance | en 137 Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.07...

  • Page 144: Troubleshooting

    Is the lens or bubble dirty? the screen is If so, clean the lens or bubble with a soft, clean cloth. dim. Is the plastic bubble protection sheet still on the bubble? F01U079609 | 1.0 | 2008.07 Installation Manual Bosch Security Systems, Inc.
  • Page 145 Have you added the IP address of the Autodome Easy IP dome to the list of IP addresses that are "Always Trusted" in Internet Explorer as per 8.6.3 Using the AutoDome Easy IP Web Server, page 41? Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.07...
  • Page 146 60 Hz for NTSC model cameras and 50 Hz for PAL model cameras. If this isn't the case, then change the synchronization mode to internal in the camera's OSD menu. F01U079609 | 1.0 | 2008.07 Installation Manual Bosch Security Systems, Inc.
  • Page 147 See Figure 8.1 on page 39. Can you access the dome using the Configuration Manager tool, which scans the network for ANY BOSCH Video over IP products? LED status indicators...
  • Page 148 IP board and the PC. Note: You may need to remove the bubble and the covert liner to see the LEDs completely. Table 15.1 LED status indicators F01U079609 | 1.0 | 2008.07 Installation Manual Bosch Security Systems, Inc.
  • Page 149 19 Aux Off 49 power 19 Aux On command 49 connectors pin mating 19 biphase 19 continuous recording 115 Bosch MPEG ActiveX 37 controlling biphase 19 cable assembly 20 camera operations 46 cables focus 46 alarm 18 image area 48...
  • Page 150 33 keyboard 15 keyboard commands 49 control 46 Aux Off command 49 Aux On 49 Recording profiles 115 keypad 50 Recording scheduler 116 Recording status 119 line lock 74 F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 151 UDP 35 UTP CAT-5 17 video formats 33 View Control tab 46 wires alarm 17 distance guide control 17 power 17 distance guide video 17 wiring 17 zoom 46 Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08...
  • Page 152 146 en | Index AutoDome Easy IP F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.
  • Page 153 Bosch Security Systems, Inc. 850 Greenfield Road Lancaster, PA 17601 Telephone 800-366-2283 800-366-1329 www.boschsecurity.com © Bosch Security Systems, Inc., 2008; F01U079609 | 1.0 | 2008.08 Data subject to change without notice.

Table of Contents