Installing the Wall Mount directly onto a Mounting Surface 4.1.3 Installing the Camera to the Mounting Cap Installing a Pipe Mount Overview 5.1.1 Installing the Pipe Mount 5.1.2 Installing the Camera to the Mounting Cap Connection Bosch Security Systems, Inc. Installation Manual F.01U.260.456 | 1.0 | 2011.10...
If not avoided, this could result in property damage or risk of damage to the unit. NOTICE! This symbol indicates information or a company policy that relates directly or indirectly to the safety of personnel or protection of property. F.01U.260.456 | 1.0 | 2011.10 Installation Manual Bosch Security Systems, Inc.
Unauthorized substitutions may cause fire, electrical shock, or other hazards. Safety check - Safety checks should be performed upon completion of service or repairs to the unit to ensure proper operating condition. Bosch Security Systems, Inc. Installation Manual F.01U.260.456 | 1.0 | 2011.10...
This unit has been designed to respect the environment as much as possible. Bosch notices Copyright This manual is the intellectual property of Bosch Security Systems and is protected by copyright. All rights reserved. Trademarks All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.
Page 6
The ongoing development of the products may mean that the content of the user guide can change without notice. Bosch Security Systems accepts no liability for damage resulting directly or indirectly from faults, incompleteness or discrepancies between the user guide and the product described.
Verify that all the parts listed in the applicable Parts List below are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative. The original packing carton is the safest container in which to transport the unit and must be used if returning the unit for service.
– 4 in. x 4 in. junction box (optional) – Ground lug (outdoor use only) [for pipe mounts] – VEZ-400 Mini PTZ Dome (includes screws to mount the camera) – Wire Puller tool – Suitable mounting screws/plugs to attach the wall/pipe mount to the mounting surface Bosch Security Systems, Inc.
| Installation Overview Mini PTZ Dome Accessories Installation Overview The VEZ-400 Mini PTZ Dome camera comes with the hardware and installation instructions necessary to mount the camera to a concrete ceiling. This following mounting accessories are available (and are supplied with separate mounting instructions): –...
Installing a Wall Mount | en Installing a Wall Mount Overview This chapter details how to mount the VEZ-400 Mini PTZ Dome to a wall. For an outdoor installation, you must obtain the mounting screws with rubber sealing rings supplied with the Mini PTZ Dome to ensure a water-tight environment inside the unit and to maintain an IP Environmental Protection Rating.
Fit a user-provided metal single-gang junction box to the wall. In moist, wet, or outdoor applications, ensure that the junction box is rated accordingly. Attach a grounded metal conduit to the junction box clamp. F.01U.260.456 | 1.0 | 2011.10 Installation Manual Bosch Security Systems, Inc.
Page 12
Fit the arm to the mounting surface or to a junction box. In wet, moist, or outdoor applications, make sure that the rubber seal is in place and pressed firmly between the arm and mounting surface on all sides. Bosch Security Systems, Inc. Installation Manual F.01U.260.456 | 1.0 | 2011.10...
15 kg (33 pounds). Mounting to an improper surface or using improper mounting material can cause camera malfunction and is a potential safety hazard. F.01U.260.456 | 1.0 | 2011.10 Installation Manual Bosch Security Systems, Inc.
Page 14
Teflon tape before the mounting cap is attached. Skip to Section 4.1.3 Installing the Camera to the Mounting Cap, page 16, to continue the installation. Bosch Security Systems, Inc. Installation Manual F.01U.260.456 | 1.0 | 2011.10...
In moist, wet, or outdoor applications, make sure that all four mounting screws are equipped with a rubber seal ring, and that they are fully tightened to ensure protection against water ingress. F.01U.260.456 | 1.0 | 2011.10 Installation Manual Bosch Security Systems, Inc.
Mini PTZ Dome Accessories Installing a Pipe Mount Overview This chapter details how to mount the VEZ-400 Mini PTZ Dome to a pipe. For an outdoor installation, you must obtain the mounting screws with rubber sealing rings supplied with the Mini PTZ Dome to ensure a water-tight environment inside the unit and to maintain an IP Environmental Protection Rating.
15 kg (33 pounds). Mounting to an improper surface or using improper mounting material can cause camera malfunction and is a potential safety hazard. Bosch Security Systems, Inc. Installation Manual F.01U.260.456 | 1.0 | 2011.10...
Page 19
Apply the following couplings (supplied with the camera) to the locations specified in the graphic below. To ensure protection against water ingress, use the supplied Teflon tape to seal the couplings. F.01U.260.456 | 1.0 | 2011.10 Installation Manual Bosch Security Systems, Inc.
Page 20
Feed all wires from the camera through the pipe using a wire puller tool, and make the necessary connections. Bosch Security Systems, Inc. Installation Manual F.01U.260.456 | 1.0 | 2011.10...
To prevent humidity problems, the camera must be installed in dry conditions, and the cable leads should be sealed once connected. Please refer to the VEZ-400 User Manual for further instructions on camera connections and configuration. Bosch Security Systems, Inc.