Field Test Modes - Nokia 6310i User Manual

The only way to deactivate the Field Test Display is to clear the
Group/display: prompt in the Net monitor menu and enter a zero or
simply enter 0000 and confirm the input by pressing OK.

Field test modes

There are three Field Test Display modes:
• execute mode
• data display mode
• help mode
The execute modes (in displays 11, 12 and 13 in Group 1) are
entered from the menu as described above. The execute mode is of
the once-off type.
To run another test in the execute mode, the Net monitor menu must
be re-activated.
While in data display mode, the field test data (e.g. carrier, power
level, cell) are visible on the main display.
While in help mode, one screen of instructions is shown for each
test to make it easier to indentify the test in question. To toggle
between these two modes, press and hold the
The scroll keys
another test without using the menu. However, the data display
mode remains, i.e. nothing will be executed or set on although such
tests would be passed. The help mode is also a non-execute mode.
and offer an easy way to switch to
4
key.