Using The Field Test Display; Activation And Deactivation - Nokia 6310i User Manual

2. Using the Field Test

Activation and deactivation

The Field Test Display is located at the end of the main menu loop.
It can be activated (or deactivated) in the following way:
1 With the display clear, press Menu to enter the menu facility.
2 Scroll in the menu main loop to the Net monitor item and press
Select.
3 Enter the index of the test to be activated at the Group/display:
prompt or enter 0 to deactivate the Net monitor. The index is
shown on the top left corner of the display. Example: If display
03 in group 01 should be activated enter 0103 in the prompt.
4 Confirm by pressing OK.
The field test data will then appear after a moment. The index of the
test will appear on the top right corner of the display.
When the Field Test Display is active, the phone works in almost the
same way as it does when the Field Test Display is inactive, except
that the keys
whereas they would scroll through the short code memory when the
Field Test Display is inactive. There may also be some other
differences compared to the operation of the normal NPL-1
terminal.
The Field Test Display appears as a so-called soft indicator, which
means that it is visible only if there is nothing else to display. For
example, once the first digit of a phone number has been entered,
the Field Test Display disappears and the entered digit is shown.
After the full number has been dialled, the number disappears and
the Field Test Display reappears on the screen.
Display
and scroll through the various tests,
3