Changing A Password - Sanyo VSP-SV2000P Instruction Manual

Sanyo vsp-sv2000p network video server instruction manual
Table of Contents

Advertisement

Network Video Server (Wired LAN) Settings
7
MAC ADDRESS display
This shows the Mac address for the video server.
Note:
Up to a maximum of 16 individual users can access
a single video server on the network at the same
time. However, only one user out of this maximum
of 16 users can be accessing at Operator or
Administrator level at any one time.
Depending on the network environment, it may not
be possible for 16 users to be connected to a video
server at the same time. Once a user has accessed
a video server, the network may not allow further
accesses, so if this happens, change the resolution
for the transferred data (by reducing it) or change
the compression ratio (by increasing it) to reduce the
volume of data being transferred.
If a 17th user tries to access a video server, the
message "THE UNIT IS BUSY!" will be displayed on
their screen. Depending on the network
environment, the message "THE UNIT IS BUSY!"
may be displayed on a user's computer screen even
when less than 16 users are accessing a video
server.

Changing a password

Example: To change the password for the
Administrator level (ID3) to "1234"
Passwords can consist of between 4 and 8
numerals.
Delete the current password ("3333") in
the password column for ID3, type "1234"
as the new password for ID3, and then
click the [SET] button.
The following window will be displayed.
Check that the details are correct, and then
close the window.
English
If a user at Administrator level accesses a video
server while a user at Operator level is accessing
the video server, the Administrator level user will
have priority. In such cases, the Operator level user
will be disconnected and the message "THE UNIT
IS DISCONNECTED!" will be displayed on their
screen.
If an Operator or Administrator attempts to access
the video server while another user with the same
access level is accessing the video server, the
second access will have priority. In such cases, the
first access will be disconnected, and the message
"THE AUTHORIZED USER LOGGED IN!" will be
displayed on that user's computer screen.
Depending on the network environment, the speed
of data transmission to users may drop if the
number of users accessing the same video server
increases, and operations such as refreshing of
images may become delayed.
(When a password has been changed)
When the video server and computer are
connected once more, the password entry
screen will be displayed, so check the username
and type in the new password ("1234") in the
password column for ID3.
– 19 –

Advertisement

Table of Contents
loading

Table of Contents