External Alarm Sensor And Motion Detector Settings - Sanyo VSP-SV2000P Instruction Manual

Alarm Settings

External Alarm Sensor and Motion Detector Settings

1
Set "ALARM REC USE" to "NO USE"
(example).
2
Use the ALARM SET screen to set the
camera channel that you would like to use
for motion detecting to "CH_1" (example).
The ALARM SET screen for the selected
camera channel will be displayed.
3
Set "EXTERNAL ALARM" to "NO"
(example).
4
Set "MOTION DETECTOR" to "ON".
The motion detector level and MOTION
DETECTOR SET screen will be displayed.
5
Use the drop-down list box to change the
"MOTION DETECTOR LEVEL" setting
(example: "2").
The smaller the value selected, the higher
will be the sensitivity. Refer to "Motion
Detector Level Sensitivity Setting" for
further details. (p. 32)
English
6
Set the sensor marks.
Refer to "MOTION DETECTOR SET
Settings".
7
Set "ALARM MODE" to "OR" (example).
An alarm will then be triggered if either the
motion detector or the external alarm sensor
detects something. Refer to "G ALARM
MODE" for details.
2
8
Click the [SET] button.
9
Set "ALARM OUT", "ALARM OUT MODE",
1
"ALARM OUT TIME", "ALARM SOUND
MODE" and "ALARM BUFFERING SET" in
the same way as for "External Alarm
Sensor Setting".
3
4
– 31 –