Connect the cable to the cache module.
6.
Install the battery pack.
7.
Route the cable
8.
page 51).
Install the access panel.
9.
Install the server into the rack.
10.
HP Trusted Platform Module option
Use these instructions to install and enable a TPM on a supported server. This procedure includes three
sections:
Installing the Trusted Platform Module board.
1.
Retaining the recovery key/password (on page 46).
2.
Enabling the Trusted Platform Module (on page 47).
3.
("BBWC battery pack or FBWC capacitor pack cabling to an optional
controller" on
Hardware options installation 44