Pci-X Riser Board Option - HP PROLIANT DL320 G6 User Manual

Install the expansion board.
7.
IMPORTANT:
properly.
Install the PCI riser board assembly (on page 18).
8.
Connect all internal cables for expansion boards.
9.
Install the access panel.
10.
Install the server into the rack.
11.

PCI-X riser board option

To install the component:
Power down the server (on page 16).
1.
Remove the server from the rack (on page 16).
2.
Remove the access panel (on page 17).
3.
Disconnect all internal cables connected to existing expansion boards.
4.
Remove the PCI riser board assembly (on page 17).
5.
Remove all installed expansion boards.
6.
The server does not power up if the PCI riser board assembly is not seated
Hardware options installation 39