Table of Contents
Advertisement
COM/LAN (continued)
LAN A (NAS) Setting
This item is used to make the communication settings
between this unit and the copy devices.
• Consult your dealer about the NAS devices supported.
System Menu
1
COM/LAN
4
LAN A (NAS) Setting
1
LAN A Address Setting
2
Device Information
1 to 8
(LAN A Address Setting)
1. Set the IP address, sub net mask, and Gateway.
step
• MAC address is shown on the bottom of the
screen of <LAN A (NAS) Setting>.
• Do not assign the same IP address or Network
Address for LAN A and LAN B.
• Do not assign "000.000.000.000" to IP address and
broadcast address. If this address is assigned,
communications or any other functions of this unit may
not be performed correctly.
• The setting cannot be changed during recording. Stop
recording before changing the setting.
(Device Information)
2. Check the IP address and directory of NAS devices
step
1 to 8.
• After checking, you can test the actual connecting
status by executing the mount test. Select "Test"
to execute the mount test.
• Using the web function of this unit is required to
input the IP address and directory.
3. Select "Return" in the screen of <LAN A (NAS)
step
Setting>.
• When the setting is changed, the power turns off
automatically and then the unit restarts.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
76
NAS Device 1 to 8 Information
3
step
1
step
2
step
System Menu
Advertisement
Table of Contents
