Table of Contents
Advertisement
Specifications
Rated Power Supply:
Rated Input:
Colour System:
Operating Temperature:
Relative Humidity:
Altitude:
Dimensions:
Weight:
Recording System
Sampling
Data Compression
Compression Unit
Recording Resolution
Recording Device
Video Input:
Monitor Output:
Throughout Output:
Cascade Video Input:
Cascade Video Output:
Audio Input:
Audio Output:
Cascade Audio Input:
Cascade Audio Output:
Clock:
Timer Program:
Memory Backup:
CONNECTORS
External storage terminal
Control terminals
Clock adjust Input
Clock adjust Output
Recording start Input
Recording stop Input
Emergency Input
Mode out +/– (1-4)
Call out +/–
Ground terminal
DC 12 V Output
Alarm Input (1-16)
Alarm Output (1-16)
PTZ terminal
Serial port
RS-485 port
Communication
LAN (A, B)
Card slot for optional board
DVD-R/RW, CD-R/RW recording format
Accessories:
Weight and dimensions shown are approximate.
Design and specifications are subject to change without notice.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Specifications
138
100 to 240 V AC, 50/60 Hz
1.0 - 0.45 A (100-240 V)
NTSC-type colour system.
41 °F-104 °F (5 °C to 40 °C)
Max. 80 (%)
Max. 2000 (m)
425 (Width) x 390 (Depth) x 185 (Height) (mm)
12.9 kg
Digital recording system
13.5 MHz
JPEG2000
Frame, Field
720 x 480, 720 X 240
Hard disc drive
16 Input BNC-Connectors:
S-Connector:
2 Output BNC-Connectors:
RCA-jack:
16 Output BNC-Connectors: 1.0 V(p-p), 75 ohms.
BNC-Connector:
BNC-Connector:
4 RCA-Jacks:
RCA-Jack:
RCA-Jack:
RCA-Jack:
±20 seconds/month (when power is supplied, 25 °C)
8 programs-Daily start and stop time for one week x 2 set
Lasts for more than 1 month (when fully charged)
Serial bus (1-6)
(For connecting the recommended optional items only)
Active: When terminals are short-circuited or "Low" Level voltage is applied. Non active: Open.
Active: When terminals are short-circuited or "Low" Level voltage is applied. Non active: Open.
(Clock adjust Output is throughout of Clock adjust Input)
Active: When terminals are short-circuited or "Low" Level voltage is applied. Non active: Open.
Active: When terminals are short-circuited or "Low" Level voltage is applied. Non active: Open.
Active: When terminals are short-circuited or "Low" Level voltage is applied. Non active: Open.
Active:
(Relay output)
Non active:
Active:
(Photo coupler output) Non active:
Max. 350 mA DC (when Main switch and power button is turned on)
Active: When terminals are short-circuited or "Low" Level voltage is applied. Non active: Open.
Active:
Non active:
RS-232C terminal
RS-422 terminal
RS-232C D-SUB 9 pin
RS-485 Input/Output RJ-11
Connector form: RJ-45
(A for external storage, B for communication)
PCI-compliant slot type (low profile) (For connecting the recommended optional items only)
Original format
AC power cord
Screws
CD
Mouse
Cable clamping band
Ferrite core
Installer's manual (this manual)
User's manual
1.0 V(p-p), 75 ohms.
Y-Signal: 1.0 V(p-p), 75 ohms.
C-Signal: 0.286 V(p-p), 75 ohms.
1.0 V(p-p), 75 ohms.
1.0 V(p-p), 75 ohms.
1.0 V(p-p), 75 ohms.
1.0 V(p-p), 75 ohms.
308 mV(rms), 50 k ohms.
308 mV(rms), 1 k ohms.
308 mV(rms), 50 k ohms.
308 mV(rms), 1 k ohms.
Bus power Max. 10 W in total
Short
Max. Drive current 500 mA DC.
Open.
Max. Voltage 24 V DC.
Short
Max. Drive current 7 mA DC.
Open.
Max. Voltage 24 V DC.
"Low" Level
Max. Drive current 7 mA DC.
Open.
Max. Voltage 24 V DC.
Physical interface: 10BASE-T/100BASE-TX
1
8
1
1
2
1
1
1
Advertisement
Table of Contents
