Cub Cadet Tank S S7232D Operator's Manual page 40

Changing the Spindle Assembly
1. Jack up the front of the mowing deck about one foot and
block it in that position.
2. Make sure the blade clutch is disengaged.
3. Remove the deck cover.
4. Remove the drive belts. (See Replacing the Deck belt.)
5. Remove the blade. (See Replacing the Blades)
6. Using a wrench or socket ratchet remove flange lock
nuts, and the four hex flange bolts. Remove the spindle
assembly. See Fig. 7-6.
Hex Screw
Flange Lock Nut
Support Plate
Spindle Assembly
Hex Flange Bolt
Blade
Flange Lock Nut
7. Reverse the process to install the spindle assembly.
Tractor Creeping
Creeping is the slight forward or backward movement of the
mower when the throttle is on and the speed control pedals are
in the neutral position. If your mower creeps, see an authorized
service dealer.
40 s 7— s
ectiOn ervice
Spacer
Figure 7-5