NEC Express5800 User Manual page 83

Server
Option Parameter
FRB-2 Policy Disable FRB2 Timer
[Retry 3 Times]
Always Reset
Boot Monitoring [Disabled]
5 Minutes
10 minutes
15 minutes
20 minutes
25 minutes
30 minutes
35 minutes
40 minutes
45 minutes
50 minutes
55 minutes
60 minutes
Boot Monitoring [Retry 3 Times]
Policy
Always Reset
Post Error Disabled
Pause
[Enabled]
AC-LINK Stay Off
[Last State]
Power On
Fan control [Normal]
Mode
Low
Description
Specify the operation of the processor
when FRB level 2 error occurred in
BSP.
Specify whether to enable or disable
the boot monitoring function on
booting, or select the time limit for
timeout.
Specify the processing at the
occurrence of timeout during boot
monitoring.
If [Retry 3 times] is selected, the
system is reset after the occurrence of
timeout and OS boot is retried up to
three times.
If [Always Reset] is selected, the
system is reset after the occurrence of
timeout and OS boot is retried
repeatedly.
Specify whether to stop the POST
once at the end of POST if an error
occurs during the POST.
Specify the state of power when the
AC power to the server is turn off
once and then on.
If the silent mode available on the
system, specifying [Low] lets the
system enter into the silent mode
where rotation of fans are controlled.
Configuring Your Server 4-17
Your Setting
[ ]: Factory-set