NEC Express5800 User Manual page 449

Application Process of "Updating the System"
"Updating the System" applies the drivers necessary for NEC Express5800 Series.
Follow this process after Hotfix for Windows x64 (KB921411) or Hotfix for Windows Server 2003
(KB921411) had been applied.
NOTE:
to your system, you do not have to apply Service pack 2 again.
1.
Log on to the system with the account that has administrative privilege
(e.g.administrator).
2.
Insert the NEC EXPRESSBUILDER DVD into the optical disk drive of server.
The Autorun Menu will be displayed
3.
Left-click on [Setup Windows], and then click [Update the system].
NOTE:
outcome.
4.
Follow the message of the screen to proceed the application.
[OK] dialog box will be displayed.
NOTE:
deployed a full installation of Windows Server 2003 x64 Edition.
Wait until the update completes.
Installing Windows Server 2003 x64 Editions F-15
If you install Windows CD-ROM that contains Service Pack 2
Right-clicking on the Autorun Menu produces the same
The following box appears during the update if you have