NEC Express5800 User Manual page 470

G-6 Installing Windows Server 2003
7.
Select [Create a Windows Server 2003 OEM-Disk for EXPRESSBUILDER] at [Create
OEM-Disk] and click [Perform].
8.
Windows Server 2003 OEM-Disk for EXPRESSBUILDER will be created.
Write-protect and attach a label, then keep it safely.
Create from [Autorun Menu]
This menu requires Microsoft Windows XP, Vista or Windows Server 2003 (or later).
You can create Windows Server 2003 OEM-Disk for EXPRESSBUILDER from [Autorun Menu], if
you have the computer on which the above operating systems operate.
Follow the steps below.
1.
Prepare one Flash FDD or 3.5-inch floppy disk.
2.
Start the Operating System.
3.
Insert the NEC EXPRESSBUILDER DVD into the optical disk drive of the server.
The Menu will appear.
4.
Connect the Flash FDD or insert a floppy disk into the floppy disk drive.
5.
Click [Create drive disk] and select [OEM-Disk for Windows Server 2003].
NOTE:
Right-click.
6.
Windows Server 2003 OEM-Disk for EXPRESSBUILDER will be created.
Write-protect and attach a label, then keep it safely.
NOTE:
write-protected.
Cancel write-protected state.
If you have already cancelled write-protected state, connect the floppy
disk drive again.
You can do the same operation with the menu appeared by the
If the following message is displayed, the floppy disk is